When lifting vehicles higher than the normal 50mm panhard rods with adjustment allow the vehicles differentials to be centralised (inline with the chassis and steering components).
These are for vehicles (4WD / utes) fitted with front struts.
They are needed on vehicles fitted with 3” or greater raised height front suspensions.
They allow the wheel alignment to be adjusted for improved steering and to eliminate tyre wear problems.
We use quality USA made brands. They are available for all popular utes plus some 4WD wagons.
When lifting utes and 4WDs with independent front suspension, we can offer a “diff drop kit” which improves the CV angles and eliminates problems with boots and bearings.
These are mainly for vehicles lifted 3 inches (75mm) and space the diff unit lower by 20 – 40mm depending on the vehicle type.
Enquire when talking to our staff as to whether there is a diff drop kit available for your make and model.
Coil springs are designed to give a comfortable ride and an excellent handling on both 4WD and 2WD vehicles. We sell both:
In-coil kits to suit most popular 4WD and 2WD vehicles.
These give an air adjustable suspension to allow improved:
They are a must for:
Air bellows to assist with load carrying allows you to have an air adjustable rear spring rating.
This allows you to fit a lighter leaf spring complimented by the air bellows. This gives a much improved ride when empty and a combination ideal for having a 1 tonne load plus towing a large trailer or caravan with safety.
We have a range of quality brands for all popular 4WD makes and models.